Corepharma Urinary Tract Infections Test(Analytes: LEU,BLO,NIT,PRO)

Corepharma Urinary Tract Infections Test(Analytes: LEU,BLO,NIT,PRO)

General Information

The Urinary Tract Infections Rapid Test (Urine) is firm plastic strips onto which several separate reagent areas are affixed. The test is for the qualitative detection of the following analytes in human urine: Blood, Protein, Nitrite and Leukocytes. The Urinary Tract Infections Rapid Test (Urine) is for single use in self-testing.

Warnings

Read the instructions carefully before performing the test. * For self-testing in vitro diagnostic use only.
* Store in a dry place at 2-30 C (36-86 F), avoiding areas of excess moisture. If the foil packaging is damaged or has been opened, please do not use.
* A clean container - uncontaminated by cleaning fluids - to collect urine.
Keep out of the reach of children.
Do not use after the expiry date or if the pouch is damaged.
* Follow the indicated time strictly.
* Use the test only once. Do not dismantle and touch the reagent areas of the test strip.
* For external use only.
* The used test should be discarded according to local regulations.
* In case of difficulties in color identification (such as Daltonism), ask for help in test reading.

Common Uses

For rapid qualitative detection of Leukocytes, Blood, Nitrite and Protein in human urine.For self-testing in vitro diagnostic use only.

Ingredients

Contents:
1 Test Strip
1 Plastic Cup
1 Colour Chart
1 Package Insert

Directions

ATTENTION: It's recommended to take a sample of urine for the test in the early morning since it's the most concentrated.
The urine used for the test should not come into contact with water from the toilet or any disinfectant or cleaning substances.
For women only: The test should not be performed during or for three days after your menstrual period.
The urine sample should not be contaminated with vaginal fluids since this may produce a misleading result.
Do not make any important medical decision without first referring to your doctor.
COLLECT URINE:
Collect part of the urine in the supplied plastic cup or using a clean cup without any residual detergents. Make sure to fill up the cup with urine.
PERFORMING THE TEST:
1) Open the foil pouch and take out the test strip. Do not touch the test fields. Once opened the pouch, it is recommended to perform the test immediately.
2) Dip the test strip in the urine sample.
ATTENTION: Press the strip and make sure that all four test fields are immersed for about 1-2 seconds.
3) Then remove the test strip and wipe off any surplus urine against the rim of the container or with an absorbent material (e.g. a paper towel) to avoid mixing chemicals from adjacent reagent areas.
4) Wait for 2 min. (do not read results after 3 minutes) Read the result separately for each parameter, compare colour with colour chart provided.